Manufacturerlow Price Gr165 Motor Grader for Road
The motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
1. The GR165 adopts 6BTA5.9-C180-II turbocharged diesel engine, which has large output torque and power reserve coefficient and low fuel consumption.
2. The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.
3. Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.
4. The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.
5. The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.
| Basic specification |
| Engine model |
D6114 |
| Rated power/speed |
125kW/2300rpm |
| Dimension(LxWxH) |
8900×2625×3470mm |
| Operating weight(Standard) |
15000kg |
| Performance specification |
| Travelling speed ,forward |
5,8,11,19,23,38 km/h |
| Travelling speed ,reverse |
5,11,23 km/h |
| Tractive force(f=0.75) |
77KN |
| Max. gradeability |
20% |
| Tire inflation pressure |
260 kPa |
| Working hydraulic pressure |
16 MPa |
| Transmission pressure |
1.3~1.8MPa |
| Operating specification |
| Max. steering angle of front wheels |
±50° |
| Max. lean angle of front wheels |
±17° |
| Max. oscillation angle of front axle |
±15° |
| Max. oscillation angle of balance box |
15 |
| Frame articulation angle |
±27° |
| Min. turning radius using articulation |
7.3m |
| Biade |
| Maximum lift above ground |
450mm |
| Maximum depth of cutting |
500mm |
| Maximum blade position angle |
90° |
| Blade cutting angle |
28°-70° |
| Circle reversing rotation |
360° |
| Moldboard width X height |
3965×610mm |
Here's a picture of the loading.
We have clients from 30 more countries in Africa, South Amercia, Mid-east countries, Southern-East Asia Countries.
1. Reply your inquiry in 12 working hours;
2. 12years experienced staffs answer all your questions;
3. Customer's design is available for certain products(OEM);
4. Spare parts for all types of trucks and machinery with reasonable price;
5. Quality first, service first, price first.
){kind=link}